|
Post by Victorian Rat on Jun 3, 2012 16:26:23 GMT -7
So im trying to make a bridge and i cant seem to get it to work. I have tried many things like:
Build bridge
23 5
build bridge1
23 5
build bridge
23 5
build bridge1
23 5
nothing seems to work. Do note i have never tired to use the sign to build a bridge i often just do it myself. I have looked around for info but i haven't see any that helped.
|
|
|
Post by eddyfredd on Jun 3, 2012 22:26:31 GMT -7
try this:
Build bridge1 (or whatever) 23 5 _ ^ double space
|
|
|
Post by Victorian Rat on Jun 3, 2012 22:32:55 GMT -7
That seems to have worked but not how i had though it would, it seems the 5 is height so it was floating in mid air. I do thank you. Now for some trial and error work.
|
|
|
Post by eddyfredd on Jun 4, 2012 4:53:01 GMT -7
place the sign at the lowest point of the bridge or use a different floorplan
|
|
|
Post by Victorian Rat on Jun 4, 2012 10:23:56 GMT -7
Yup i know
|
|
|
Post by eddyfredd on Jun 4, 2012 11:43:43 GMT -7
cool
|
|
|
Post by rscott6666 on Jun 4, 2012 12:18:08 GMT -7
I see you made a nice gravel bridge in a different thread. I don't think the bridge parameter of the floorplans works so well when you have the ends being different than the middle. I thought about adding end sections into the floorplan file but thought it might get too complicated.
|
|
|
Post by Victorian Rat on Jun 4, 2012 12:22:16 GMT -7
It works to an extent i think, it is tricky to get it right, i had to go back into the FP and edit some of it, But its not really a Bridge, its not like the original Bridge1 where you can set the height and length, its a set piece. I figure it would work well though as a bridge either way mainly because it spans the average width of a river.
|
|
|
Post by eddyfredd on Jun 4, 2012 12:27:25 GMT -7
But then, I would save the floorplan not as a bridge but as a structure. Or can you change the lenght?
|
|
|
Post by Victorian Rat on Jun 4, 2012 12:29:51 GMT -7
Im not sure i have to go and look into other bridge FP's. I dont made FP's often so my knowledge is a bit lacking. As it is if, you use the file, you cant change the length its saved as a structure. I will get back to you on the changing of the length
|
|
|
Post by Victorian Rat on Jun 4, 2012 13:34:42 GMT -7
Well it will have to stay as a structure because i wasn't able to make it into a bridge, someone knows how, let me know. I did look on the Wiki but it didn't make sense to me.
|
|