|
Post by eddyfredd on Jul 3, 2012 14:11:36 GMT -7
Build wall... length height
example: Build wallCity2 10 5
(But I think the height doesn't work...)
|
|
|
Post by rscott6666 on Jul 3, 2012 16:23:39 GMT -7
The height should work. It should be optional for some walls, if the file gives a default height. I didn't want people to have to fill in so many numbers on the sign...
|
|
|
Post by eddyfredd on Jul 4, 2012 5:22:25 GMT -7
All my city walls had the same height...
|
|
|
Post by eddyfredd on Jul 4, 2012 11:21:44 GMT -7
The wallCity3 ist partly stone and party wood and the wallCity4 is only stone. You also have wallCastle2 (a bit stone), wallCastle3 (most stone and a bit wood) and wallCastle4 (stone).
|
|
|
Post by eddyfredd on Jul 4, 2012 11:22:00 GMT -7
No obsidian wall ;D
|
|
|
Post by rscott6666 on Jul 4, 2012 18:03:19 GMT -7
The towers are built the same as any other structure, you just need to know the name of the tower you want. Then create and place a sign that says build towername and let the builder work.
Towers will be easier to build after the next update.
|
|
|
Post by darakudakara on Jul 5, 2012 0:08:42 GMT -7
personally, I just made a flat creative world, and had my builder make one of everything, marking exactally where I put the signs. Easiest way to find out what everything looks like, and their placement.
the height modifier for the walls does work, but if your going to be using any of the gate houses it is best to leave this one blank, and go with the default height. Most of the walls don't line up with the walkways on the gatehouses if you change it.
|
|
|
Post by eddyfredd on Jul 5, 2012 13:04:10 GMT -7
I have this map, too ;D
|
|