|
Post by hunterxr360 on Oct 28, 2012 7:37:17 GMT -7
Greetings,
I am trying to swap or add new floorplans to the chest...
IE. a level 5 house floor plan from a custom floorplan
It works partly.....the "lvl 5" house starts to build but does not actually complete even though the builder says it has.
When I open the floor plan for the default houses I see the following...
line 1: v2 'house, level 4 - Aristocrats house (12x12x16) line 2: structure line 3: 6 1 5 line 4: line 5: glossary line 6: @include default.lexicon
then the actually layout...
Now, in my custom level 5 floorplan I have the same information....
though the house will be 14x17x17 instead of 12x12x16
does line 3 have something to do with the actual house (I notice it is different depending on the building being built)
if so....how do I figure out what to put in line 3 to make it work?
Thanks
|
|
|
Post by CoconutCurry on Oct 29, 2012 1:31:03 GMT -7
The third line tells the builder the dimensions of the building in relation to the sign. There should be a file in the .zip called "builder.txt" that explains how floorplans work.
|
|
|
Post by hunterxr360 on Oct 30, 2012 1:48:37 GMT -7
ok..so that is not going to resolve my issue...
base...complete level0...seems complete level1...stops three quarters complete level2...stops half complete level3...stops one quarter complete level4...stops at back wall level5...stops at back wall level6 - level16 do not build at all
Builder walks away saying "Work FInished"
This custom floorplan did not have the first three lines like the default floorplans.
Before I tried to get it to build as the fifth upgrade to the citzen homes, the builder would build it completely and correctly using the sign building approach....now it wont even build correctly like that
|
|